A 20ft container gives you roughly 28 CBM of usable loading space — enough for around 180–260 stacking rattan dining chairs, 14–18 six-seat dining sets, or a mixed hospitality load, shipped FOB Semarang or Surabaya. Send your item list to the Juara Holding Group desk and you get a per-piece quote plus a cube-out load plan.
That single box is the standard first order for importers testing Bali rattan furniture wholesale: small enough to fund comfortably, big enough to land retail-ready stock across three to five designs. The trade behind it is real scale — BPS-Statistics Indonesia recorded US$634 million of goods exported from Bali Province in 2024.
There is a structural reason to buy finished pieces rather than material. Under Trade Regulation Permendag No. 38 of 2017, raw rattan may not be exported from Indonesia — only semi-finished rattan and finished furniture can, a split then-Trade Minister Enggartiasto Lukita confirmed in Cirebon, as reported by ANTARA News. Weaving (anyaman) and finishing value stays inside Indonesian workshops. Policy has shifted before, so treat this as the rule as of 2026, not a permanent guarantee.
How Much Fits in a 20ft Container of Bali Rattan Furniture?
A standard 20ft dry container holds about 33 CBM on paper. Woven furniture never uses all of it: cartons, pallets and void space around irregular shapes absorb 4–6 CBM. Plan around ~28 CBM usable and you will be close to reality.
From there the math is simple: packed CBM per piece × piece count ≤ 28.
| Piece type | Typical packed volume* | Approx. pieces in ~28 CBM |
|---|---|---|
| Stacking dining chair (nested 4–6 high) | 0.11–0.15 CBM | 180–260 |
| Assembled lounge chair, cartoned | 0.30–0.40 CBM | 70–90 |
| Knock-down dining table (flat-packed) | 0.35–0.50 CBM | 55–80 |
| 6-seat dining set (KD table + stacking chairs) | 1.5–2.0 CBM | 14–18 sets |
| Woven side table or stool, nested | 0.08–0.12 CBM | 230–350 |
*Indicative packed volumes as of 2026. Your numbers depend on the exact dimensions and packing method of each SKU, confirmed in the load plan before production.
What Do Example 20ft Load Plans Look Like?
Three plans we draft most often for buyers of mebel rotan:
- Retail chair program — 220 stacking dining chairs in one weave pattern across two finishes. The deepest unit-cost efficiency, because nesting wastes almost nothing.
- Dining-set program — 16 six-seat sets: knock-down teak-frame tables plus stacking chairs. Lands as complete, floor-ready sets.
- Mixed hospitality load — 60 dining chairs, 10 dining sets, 20 side tables, 8 lounge chairs, 6 daybeds. The classic cafe or villa fit-out.
Mixed is the norm. There is no per-design minimum: the MOQ is whatever mix cubes out the container.
What Should a 20ft Container Budget Look Like in 2026?
Every figure below is an indicative example only, as of 2026 and subject to change. Real pricing is quote-based per piece and per specification from your item list — workshops do not publish fixed rates, and no price on this page belongs to any named factory. These ranges reflect what workshops in Bali and Cirebon commonly quote:
| Line item | Indicative example (USD, FOB) | Notes |
|---|---|---|
| Stacking natural-rattan dining chair | $45–$85 / pc | Anyaman grade and frame drive the spread |
| Synthetic (HDPE) outdoor lounge chair | $90–$160 / pc | Powder-coated aluminum frame typical |
| 6-seat dining set | $700–$1,200 / set | KD teak or mindi table plus six chairs |
| Woven daybed | $250–$450 / pc | Volume-hungry; watch price per CBM |
| Export packing, per container | $400–$800 | Cartons, shrink wrap, desiccants, dunnage |
| Sea freight, 20ft FOB to major port | Quoted at booking | Rates move monthly, so they are quoted live |
Production for a full 20ft typically runs four to six weeks. Logistics guides put Bali-to-Germany shipments at 6–10 weeks in total including production and packing; sea freight from Bali to Australia alone usually takes 2–6 weeks. Air freight exists but almost never pencils out for bulky woven furniture.
How Do Knock-Down and Stackable Designs Raise Your Piece Count?
Air is the most expensive thing you can ship. Two design decisions squeeze it out:
- Stackable chairs. A chair engineered to nest four-to-six high cuts packed volume per piece by half or more — same look on the shop floor, roughly twice the container count.
- Knock-down (KD) frames. Tables, bed frames and shelving with bolt-together legs flat-pack into slim cartons. A KD dining table can drop from about 0.9 CBM assembled to about 0.4 CBM packed.
- Nesting families. Side tables and stools sized to sit inside one another load like stacked cups.
Bali furniture guides consistently note that artisans adjust dimensions, finishes and construction to buyer specification. If a design is not yet stackable or KD, it can usually be re-engineered before production — send drawings or photos so the maker fully understands the requirement.
How Is the Furniture Packed Against Container Humidity?
A sealed steel box crossing the equator sweats. Rattan travels well when the packing respects that:
- Each piece is wiped dry and wrapped in shrink film to block surface moisture.
- Corner blocks and single-face corrugated sheet protect legs and woven edges.
- Pieces go into five-ply cartons — chairs in nested stacks, KD parts in flat packs.
- Desiccant packs sit inside cartons and hang in the container to absorb condensation.
- Cartons are floor-loaded tight with dunnage so nothing shifts in a swell.
Paperwork travels with the box: the standard export set (detailed in the FAQ below), fumigation certificates for teak, mahogany or mindi frames, and SVLK timber-legality coverage on the wood component. EU-bound loads must also meet plant-health rules and safety standards including flame-retardancy and chemical-content limits — we prepare the documents rather than sell certainty about any customs desk.
How Does a 20ft Container Order Work?
- Send your item list — designs, quantities, photos or drawings, destination port — to the Juara Holding Group desk.
- Receive a per-piece quote built from your exact specs, with alternatives flagged where a KD or stackable version would load better.
- Approve the load plan — a CBM sheet showing how your mix cubes out at roughly 28 CBM.
- Place a deposit. Production runs about 4–6 weeks in workshops in Bali and Cirebon, with photo QC before packing.
- Settle the balance at shipment — packed, documented and loaded FOB Semarang or Surabaya.
- Clear and receive, with the full document set forwarded ahead of the vessel’s arrival.
> Plan your 20ft container now. Send your item list — even a rough one — and get a per-piece quote plus a free cube-out load plan. WhatsApp +62 811-3941-4563 or email bd@juaraholding.com. Bali Rattan Furniture Wholesale is part of Juara Holding Group — an Indonesian group operating from Bali across Indonesia since 2015.
Frequently Asked Questions
Is a 20ft or 40ft container better for a first Bali rattan order?
A 20ft is the usual first order: about 28 CBM usable, enough to test three to five designs at retail depth without heavy capital. A 40ft roughly doubles the cube while freight rises far less than double, so landed cost per piece falls — most buyers step up to 40ft on the reorder, once sell-through is proven.
Can I mix natural and synthetic rattan in one 20ft container?
Yes, and most buyers do. Natural rotan suits indoor and covered spaces; HDPE synthetic weave is the honest choice for uncovered outdoor use, because natural fiber degrades in rain and direct sun. The load plan only needs packed dimensions per SKU, so indoor and outdoor lines share one container at no premium.
Which Indonesian port does a 20ft rattan furniture container ship from?
Containers typically load FOB Semarang or Surabaya, the Java ports serving Indonesia’s furniture belt. Pieces finished in Bali and woven in Cirebon are consolidated and trucked to port for stuffing. From there, sea freight runs roughly 2–6 weeks to Australia, while Germany-bound orders total about 6–10 weeks including production and packing.
What documents accompany a 20ft rattan furniture container?
The standard set is commercial invoice, packing list, bill of lading, certificate of origin and the Indonesian export declaration. Wood-framed pieces add fumigation certificates, and their timber component is covered by SVLK legality verification, mandatory since 1 January 2015. EU destinations layer on plant-health rules plus flame-retardancy and chemical-content standards.