Skip to content

Export desk

Bali Rattan Furniture 40ft Container Wholesale Guide

A 40ft high-cube container gives Bali rattan furniture wholesale buyers roughly 68 usable CBM — about 2.4 times a 20ft load for far less than double the freight. Pricing is quote-based per piece and spec: send your item list to the Juara Holding Group desk for a full cube-out plan, indicative FOB figures, and a production schedule.

Loading FOB
Semarang or Surabaya
Container
20ft, 40ft or mixed
Documents
Invoice, B/L, COO, fumigation
Reply
One business day, Bali hours

If you have already run a 20ft trial or bought LCL, the 40ft — and especially the 40HC — is where container economics start working properly for woven furniture. Rattan is light but bulky: mebel rotan cubes out long before it weighs out, so the extra volume of a high-cube goes straight into sellable pieces rather than dead freight.

How Many Pieces Fit in a 40ft Container of Bali Rattan Furniture?

A standard 40ft box holds about 67 CBM of theoretical space; a 40HC stretches that to roughly 76 CBM.

Three illustrative loading plans — piece counts and values are examples only, as of 2026 and subject to change; your real plan is built from your item list:

*Illustrative ranges only. Every quotation is per piece and per spec from workshops in Bali and Cirebon; no fixed price list exists.

Small woven items matter more than they look. Baskets, lampshades, and mirror frames ride inside furniture voids and spare carton space, lifting revenue per CBM without adding a dollar of freight.

ScenarioExample mix (40HC, ~68 CBM)
Retail dining program160 natural-rattan dining chairs, 24 dining tables, 40 pendant lampshades as void fill
Hospitality outdoor fit-out80 synthetic (HDPE) lounge chairs, 30 coffee tables, 20 sun loungers, 12 daybeds
Mixed importer restock60 rattan armchairs, 20 loveseats, 40 side tables, 60 mirrors and keranjang anyaman as fillers

Does a 40ft Container Beat a 20ft on Per-Piece Cost?

Almost always — if you can sell the volume. Ocean freight is priced per box, not per piece, so doubling capacity without doubling the rate compresses your landed logistics cost on every chair.

An illustrative comparison, FOB Surabaya to a North-European port, with rates as of early 2026 and subject to change (confirm current rates with your forwarder):

The same logic holds on the Indonesian side. Trucking from Bali or Cirebon to the port, export documentation, and inspection are largely per-shipment costs, now spread across roughly two and a half times the goods.

The structural advantage sits underneath those numbers. Under Trade Regulation Permendag No. 38 of 2017, raw rattan may not be exported from Indonesia while finished rattan furniture may — then-Trade Minister Enggartiasto Lukita confirmed the split, speaking in Cirebon and reported by ANTARA News. Weaving and finishing stay inside Indonesia, which is why a full container of finished furniture from Bali competes on value rather than commodity price.

Metric20ft (~27 CBM usable)40HC (~68 CBM usable)
Example ocean freightUS$2,300US$3,800
Freight per usable CBM~US$85~US$56
Example freight per dining chair (0.35 CBM boxed)~US$30~US$20
Capacity vs 20ft1x~2.5x

How Long Should You Plan for a Full 40ft Production Run?

A 40HC is a serious commitment for hand-weaving workshops, so build the calendar backwards from your sales season.

Air freight exists on paper but almost never pays for bulky woven furniture; sea freight is the default, and the calendar above is the honest planning tool.

StageTypical durationNotes
Quotation and sampling1-2 weeksCounter-samples, or photo/video approval of existing models
Production (full 40ft run)4-8 weeksAnyaman is hand work; large custom runs sit at the upper end
QC, packing, trucking to portAbout 1 weekBali or Cirebon to Semarang or Surabaya
Sailing to Australia2-6 weeksTypical sea-freight window from Indonesia
Total to Germany6-10 weeksLogistics-guide figure including production; full custom 40ft runs can stretch past it
Graded rattan poles and coils stored in an Indonesian warehouse

What Loading Reports and Inspections Can You Order?

For a first full container, most importers add a pre-shipment inspection — by their own agent or a third-party service — checking a sample of cartons against the packing list for weave quality, frame joints, finish consistency, and moisture. On loading day you can request a loading report: timestamped photos or video of the empty box, dunnage, each loading stage, and the final seal number.

The document set follows the standard Bali furniture export pattern: commercial invoice, packing list, bill of lading, certificate of origin, and the Indonesian export declaration. Wooden components trigger more. Fumigation certificates apply to wooden furniture, phytosanitary paperwork depends on destination, and since 1 January 2015 SVLK timber-legality verification has been mandatory for wood and wood-furniture exports — covering teak, mahogany, or mindi frames in your load. EU-bound containers must also meet European plant-health rules plus safety standards including flame-retardancy and chemical-content restrictions, and German customs expect detailed product descriptions, declared values, and country-of-origin certificates.

Wrapped rattan furniture loaded into a shipping container

Wrapped rattan furniture loaded into a shipping container.

How Does a 40ft Container Quotation Work?

> Request your 40ft container quotation. Send your item list — even a rough one — to the Juara Holding Group export desk and receive a cube-out plan plus indicative per-piece FOB pricing. WhatsApp +62 811-3941-4563, email bd@juaraholding.com, or use the enquiry form on the contact page. Bali Rattan Furniture Wholesale is part of Juara Holding Group — an Indonesian group operating from Bali across Indonesia since 2015.

  1. 01

    Send your item list

    Models, dimensions, materials — natural rotan or synthetic HDPE — finishes, and target quantities. Photos or drawings help the workshop read your intent exactly; Bali furniture guides confirm most artisans adjust dimensions, finishes, and colours to buyer specification.

  2. 02

    Receive a cube-out plan and quotation

    Per-piece indicative pricing plus a loading plan showing how your mix fills a 40ft or 40HC, FOB Semarang or Surabaya.

  3. 03

    Approve samples

    Counter-samples for new designs, or detailed photo and video approval for existing models.

  4. 04

    Production and QC

    Progress photos through the run, with an optional third-party pre-shipment inspection before packing.

  5. 05

    Loading and documents

    Loading report, seal number, and the full export document set forwarded to your customs broker.

  6. 06

    Sail and settle

    Balance paid per the terms agreed in your quotation, with tracking through to your port.

Frequently Asked Questions

Read the full FAQ

The rest of the export desk

Container maths, minimums and paperwork, one page each.

Send the spec, get a dated quote

Tell us the destination market, the pieces you want and roughly what volume. The desk replies within one business day, Bali hours.

Handled by BD Juara Holding Group

Part of Juara Holding Group — operating from Bali across Indonesia since 2015