Is Bali synthetic rattan furniture genuinely UV-resistant outdoors?

Quality HDPE weave is, because UV stabilisers and pigment are extruded through the strand rather than painted on, so fading is slow and even in tropical or Mediterranean sun. Cheap hollow PE fiber is not; it goes brittle within a couple of seasons. Ask for the fiber spec sheet with your quotation and specify solid or half-round HDPE for open-air installations.

What is the minimum order for wholesale synthetic rattan from Bali?

There is no fixed per-model MOQ. The working minimum is a mixed 20ft or 40ft container that cubes out — roughly 33 cbm or 76 cbm high-cube — combining dining sets, loungers, sofas, and tables across models. Send your item list and the desk plans the load so freight cost per piece stays sensible for resale.

Should I choose aluminium or steel frames for synthetic rattan furniture?

Powder-coated aluminium for anything outdoor or coastal: it cannot rust, weighs less, and cuts freight cost per piece. Powder-coated steel is cheaper up front but corrodes wherever the coating chips, so reserve it for covered or budget indoor lines. Teak accents are available; SVLK legality documents cover the wood component, mandatory for Indonesian wood-furniture exports since January 2015.

How long does a synthetic rattan container from Bali take to arrive?

Plan in weeks, not days. Sea freight from Bali to Australia typically takes 2–6 weeks, while logistics guides put Bali-to-Germany shipments at 6–10 weeks total including production and packaging. Your quotation includes a dated production schedule for your specific mix, since weaving time varies with piece count. Air freight exists but is rarely economical for bulky woven furniture.

Can I order custom colors or OEM designs in synthetic rattan?

Yes. Bali furniture guides verify that most makers happily adjust dimensions, finishes, and colors to buyer specification — the factual basis for OEM and private-label programs. Send drawings or reference photos so the workshop fully understands the requirement. Custom fiber colors are quoted per production run, and OEM labelling, swing tags, and packaging artwork can be built into the container quotation. Related: rattan furniture exporter · natural rattan furniture wholesale · the complete guide Ready to plan it? Message the team on WhatsApp or bd@juaraholding.com.

Collections

Bali Synthetic Rattan Furniture Wholesale | HDPE Supply

Bali synthetic rattan furniture wholesale means container loads of UV-stabilised HDPE or PE weave, hand-woven over powder-coated aluminium frames by workshops in Bali and Cirebon, shipped FOB Semarang or Surabaya. MOQ is a mixed 20ft or 40ft container that cubes out, and pricing is quote-based per piece from your item list — every USD figure below is an indicative example only.

Request a Quote Browse the collections

Buyers usually choose synthetic — rotan sintetis in Indonesian — for one reason: it survives outdoors. This page covers fiber grades, frame pairings, cushion fabrics, and container math honestly, including where natural rattan is still the better buy.

Finished rattan chairs lined up for inspection before export

Why Source Synthetic Rattan from Bali Instead of Larger Asian Factories?

The short answer is weaving skill plus design finishing. Under Trade Regulation Permendag No. 38 of 2017, raw rattan cannot be exported from Indonesia while finished furniture can — a policy then-Trade Minister Enggartiasto Lukita defended in Cirebon, as reported by ANTARA News. That rule kept generations of anyaman (hand-weaving) labor onshore, and the same crews who weave natural rotan now weave HDPE fiber to the same tension and pattern standards.

Bali adds the export layer. Jimbaran and Denpasar host most of the island's export warehouses and large-scale furniture suppliers, and BPS-Statistics Indonesia reports Bali Province exported goods worth US$634.5 million in 2024. Machine-woven volume lines elsewhere can beat Indonesia on unit price; hand-woven character, mixed-material design, and low-pressure mixed containers are where Bali wins.

How Does Synthetic Rattan Really Perform Against Natural Rattan?

Honestly: natural rattan is the better material indoors and the wrong material outdoors. Sun dries and cracks natural fiber; rain and humidity invite mould. HDPE fiber is extruded with UV stabilisers and pigment running through the strand, so it shrugs off tropical sun, rain, and pool chlorine — and cleans with a hose.

One caution: cheap hollow PE sold as "synthetic rattan" goes brittle after a season or two of hard sun. Specify solid or half-round HDPE and ask for the fiber spec sheet in your quotation.

Factor	Natural rattan (rotan asli)	Synthetic HDPE/PE
Direct sun	Fades, dries, cracks within seasons	UV-stabilised; slow, even weathering
Rain and humidity	Mould risk, fiber swelling	Unaffected; drains and dries fast
Feel and look	Warm, organic, one-of-a-kind	Uniform; premium HDPE mimics natural closely
Lifespan outdoors	Short without cover	Several years of hospitality rotation
Repair	Any weaver can patch it	Re-weavable with matching fiber stock
Best use	Interiors, covered verandas	Poolside, open terraces, marine air

Which Fiber Types and Frame Pairings Should You Specify?

Frame notes: aluminium never rusts and trims freight weight; steel is cheaper per piece but corrodes where the coating chips, so keep it for covered use. Where teak or other wood components appear, SVLK timber-legality documentation — mandatory for Indonesian wood-furniture exports since 1 January 2015 — covers the wood element of the piece.

Fiber type	Look and feel	Frame pairing	Typical program
HDPE half-round	Closest profile to natural rotan	Powder-coated aluminium	Hotel terrace dining, classic wicker
HDPE flat weave	Clean modern band	Powder-coated aluminium	Loungers, modular deep seating
Textured HDPE (kubu-grey look)	Brushed vintage grey tone	Aluminium with teak accents	Boutique resorts, feature pieces
Round-core PE	Budget wicker look	Powder-coated steel	Price-led retail, covered areas
Polyolefin rope	Open cord aesthetic	Powder-coated aluminium	Contemporary café and pool lines

What Does Bali Synthetic Rattan Furniture Wholesale Pricing Look Like?

There is no standard industry price list — every workshop quotes per piece and per spec. The figures below are indicative examples only, as of 2026 and subject to change; your real quotation is built line by line from your item list.

A 20ft container holds roughly 33 cbm and a 40ft high-cube about 76 cbm, but piece count depends entirely on your mix — which is why quoting starts from the item list, not a rate card.

Item (HDPE weave, aluminium frame)	Indicative FOB example, as of 2026	Cube note
Stacking dining chair	USD 45–75	Stacks high; best cube efficiency
Lounge chair	USD 95–160	Cushions ship compressed
Sun lounger	USD 120–200	Nests in pairs
3-seat outdoor sofa	USD 230–390	Modular arms save cube
Daybed	USD 280–480	Bulky; plan the load around it
Dining table, glass or teak top	USD 180–350	Tops packed flat

What Cushion and Fabric Options Come with the Furniture?

Solution-dyed acrylic

color locked in the fiber; the outdoor benchmark for fade resistance
Olefin

solid mid-range outdoor value with good stain behavior
Coated polyester

budget option, best for covered or seasonal use
Quick-dry foam

open-cell core that drains overnight rain instead of holding it
All covers zippered and removable; branded performance fabrics quoted on request

Wrapped rattan furniture loaded into a shipping container.

How Does a Container Order Work?

01
Send your item list

models, quantities, fiber and frame preferences, destination port — by WhatsApp, email, or the enquiry form.
02
Receive a per-piece quotation with a container plan showing how your mix cubes out in a 20ft or 40ft.
03
Confirm specs

dimensions, fiber color, cushions. Bali furniture guides confirm most makers adjust dimensions, finishes, and colors to buyer specification; send drawings or reference photos so nothing is lost in translation.
04
Deposit and production

weaving, framing, and QC photos as the order progresses.
05
Packing and export documents

commercial invoice, packing list, bill of lading, certificate of origin, Indonesian export declaration, plus fumigation or SVLK papers where wood components apply.
06
FOB loading at Semarang or Surabaya

Sea freight to Australia typically runs 2–6 weeks; logistics guides put Bali-to-Germany shipments at 6–10 weeks total including production and packaging.

Get a Container Quote

The buying desk is run by the Juara Holding Group concierge team — part of Juara Holding Group, an Indonesian group operating from Bali across Indonesia since 2015. Send your item list and get a line-by-line quotation with a container plan, not a generic price sheet.

Request a Quote Email the desk