A 40ft high-cube container gives Bali rattan furniture wholesale buyers roughly 68 usable CBM — about 2.4 times a 20ft load for far less than double the freight. Pricing is quote-based per piece and spec: send your item list to the Juara Holding Group desk for a full cube-out plan, indicative FOB figures, and a production schedule.
If you have already run a 20ft trial or bought LCL, the 40ft — and especially the 40HC — is where container economics start working properly for woven furniture. Rattan is light but bulky: mebel rotan cubes out long before it weighs out, so the extra volume of a high-cube goes straight into sellable pieces rather than dead freight.
How Many Pieces Fit in a 40ft Container of Bali Rattan Furniture?
A standard 40ft box holds about 67 CBM of theoretical space; a 40HC stretches that to roughly 76 CBM. With boxed, mixed furniture, plan on 60-63 usable CBM in a standard 40ft and 65-68 CBM in a high-cube once cartons, protective wrapping, and loading gaps are counted.
Three illustrative loading plans — piece counts and values are examples only, as of 2026 and subject to change; your real plan is built from your item list:
| Scenario | Example mix (40HC, ~68 CBM) | Indicative FOB value* |
|---|---|---|
| Retail dining program | 160 natural-rattan dining chairs, 24 dining tables, 40 pendant lampshades as void fill | US$22,000-38,000 |
| Hospitality outdoor fit-out | 80 synthetic (HDPE) lounge chairs, 30 coffee tables, 20 sun loungers, 12 daybeds | US$35,000-60,000 |
| Mixed importer restock | 60 rattan armchairs, 20 loveseats, 40 side tables, 60 mirrors and keranjang anyaman as fillers | US$28,000-48,000 |
*Illustrative ranges only. Every quotation is per piece and per spec from workshops in Bali and Cirebon; no fixed price list exists.
Small woven items matter more than they look. Baskets, lampshades, and mirror frames ride inside furniture voids and spare carton space, lifting revenue per CBM without adding a dollar of freight.
Does a 40ft Container Beat a 20ft on Per-Piece Cost?
Almost always — if you can sell the volume. Ocean freight is priced per box, not per piece, so doubling capacity without doubling the rate compresses your landed logistics cost on every chair.
An illustrative comparison, FOB Surabaya to a North-European port, with rates as of early 2026 and subject to change (confirm current rates with your forwarder):
| Metric | 20ft (~27 CBM usable) | 40HC (~68 CBM usable) |
|---|---|---|
| Example ocean freight | US$2,300 | US$3,800 |
| Freight per usable CBM | ~US$85 | ~US$56 |
| Example freight per dining chair (0.35 CBM boxed) | ~US$30 | ~US$20 |
| Capacity vs 20ft | 1x | ~2.5x |
The same logic holds on the Indonesian side. Trucking from Bali or Cirebon to the port, export documentation, and inspection are largely per-shipment costs, now spread across roughly two and a half times the goods.
The structural advantage sits underneath those numbers. Under Trade Regulation Permendag No. 38 of 2017, raw rattan may not be exported from Indonesia while finished rattan furniture may — then-Trade Minister Enggartiasto Lukita confirmed the split, speaking in Cirebon and reported by ANTARA News. Weaving and finishing stay inside Indonesia, which is why a full container of finished furniture from Bali competes on value rather than commodity price. BPS-Statistics Indonesia records Bali Province exports of US$634,496,917 in 2024, and Indonesia’s rattan furniture exports under HS 94038300 reached about US$14.6 million that year, across a trade serving 69 countries and more than 400 buyers.
How Long Should You Plan for a Full 40ft Production Run?
A 40HC is a serious commitment for hand-weaving workshops, so build the calendar backwards from your sales season.
| Stage | Typical duration | Notes |
|---|---|---|
| Quotation and sampling | 1-2 weeks | Counter-samples, or photo/video approval of existing models |
| Production (full 40ft run) | 4-8 weeks | Anyaman is hand work; large custom runs sit at the upper end |
| QC, packing, trucking to port | About 1 week | Bali or Cirebon to Semarang or Surabaya |
| Sailing to Australia | 2-6 weeks | Typical sea-freight window from Indonesia |
| Total to Germany | 6-10 weeks | Logistics-guide figure including production; full custom 40ft runs can stretch past it |
Air freight exists on paper but almost never pays for bulky woven furniture; sea freight is the default, and the calendar above is the honest planning tool.
What Loading Reports and Inspections Can You Order?
For a first full container, most importers add a pre-shipment inspection — by their own agent or a third-party service — checking a sample of cartons against the packing list for weave quality, frame joints, finish consistency, and moisture. On loading day you can request a loading report: timestamped photos or video of the empty box, dunnage, each loading stage, and the final seal number.
The document set follows the standard Bali furniture export pattern: commercial invoice, packing list, bill of lading, certificate of origin, and the Indonesian export declaration. Wooden components trigger more. Fumigation certificates apply to wooden furniture, phytosanitary paperwork depends on destination, and since 1 January 2015 SVLK timber-legality verification has been mandatory for wood and wood-furniture exports — covering teak, mahogany, or mindi frames in your load. EU-bound containers must also meet European plant-health rules plus safety standards including flame-retardancy and chemical-content restrictions, and German customs expect detailed product descriptions, declared values, and country-of-origin certificates.
How Does a 40ft Container Quotation Work?
- Send your item list. Models, dimensions, materials — natural rotan or synthetic HDPE — finishes, and target quantities. Photos or drawings help the workshop read your intent exactly; Bali furniture guides confirm most artisans adjust dimensions, finishes, and colours to buyer specification.
- Receive a cube-out plan and quotation. Per-piece indicative pricing plus a loading plan showing how your mix fills a 40ft or 40HC, FOB Semarang or Surabaya.
- Approve samples. Counter-samples for new designs, or detailed photo and video approval for existing models.
- Production and QC. Progress photos through the run, with an optional third-party pre-shipment inspection before packing.
- Loading and documents. Loading report, seal number, and the full export document set forwarded to your customs broker.
- Sail and settle. Balance paid per the terms agreed in your quotation, with tracking through to your port.
> Request your 40ft container quotation. Send your item list — even a rough one — to the Juara Holding Group export desk and receive a cube-out plan plus indicative per-piece FOB pricing. WhatsApp +62 811-3941-4563, email bd@juaraholding.com, or use the enquiry form on the contact page. Bali Rattan Furniture Wholesale is part of Juara Holding Group — an Indonesian group operating from Bali across Indonesia since 2015.
Frequently Asked Questions
How many CBM fit in a 40ft high-cube for rattan furniture?
A 40HC offers about 76 CBM of theoretical space; with boxed rattan furniture, realistic usable volume is 65-68 CBM after cartons and loading gaps. Because rattan is light, the container cubes out far below its weight limit, so the practical planning question is always volume, never tonnage.
Can I mix natural and synthetic rattan in one 40ft container?
Yes — mixed loads are normal and often smarter. Many importers pair natural-rattan indoor lines woven in the Cirebon tradition with HDPE outdoor pieces finished in Bali, plus baskets and lampshades as void fill. One container, one document set, and a broader range to test across indoor and outdoor customers.
How far ahead should I order a 40ft container for peak season?
Work backwards: a full hand-woven run takes roughly 4-8 weeks in production, about a week for QC and trucking to Semarang or Surabaya, then 2-6 weeks sailing to Australia or longer to Europe. For a northern-hemisphere summer season, most importers place 40ft orders four to five months ahead.
Is SVLK needed for a 40ft container of rattan furniture?
SVLK, mandatory since 1 January 2015, covers wood and wood-furniture exports — so it applies to the wooden components of your load, such as teak, mahogany, or mindi frames. Sources do not extend it to rattan fiber itself. The quotation stage flags which items on your list need SVLK, fumigation, or phytosanitary paperwork.