Bali rattan outdoor lounge chair wholesale orders ship as mixed 20ft or 40ft containers, FOB Semarang or Surabaya, with quote-based per-piece pricing built from your item list. Synthetic HDPE weave on powder-coated aluminium suits full outdoor exposure; natural rotan suits covered terraces. Send your spec sheet to the Juara Holding Group desk for a line-item quotation.
This page is for importers, retailers, and hospitality buyers specifying lounge chairs — poolside stackers, deep-seat club chairs, sun loungers, and modular corner sets — woven by workshops in Bali and Cirebon and consolidated through Bali’s Jimbaran–Denpasar warehouse corridor, where most large-scale export suppliers are based.
Which Lounge Chair Specs Should Your RFQ Lock Down First?
Lounge chairs are the most spec-sensitive line in a rattan container. Seat geometry, weave type, and cushion build each move the per-piece price and the cubic volume, so fix these before asking for numbers:
| Spec area | Typical wholesale range | What to state in your RFQ |
|---|---|---|
| Seat width | 55–75 cm (club chairs); 60–70 cm (sun loungers) | Interior seat width, not overall width |
| Seat depth / length | 55–70 cm deep; loungers 190–205 cm long | Reclined length matters for cube-out |
| Seat height | 35–42 cm | Pool decks often spec lower, 32–35 cm |
| Frame | Powder-coated aluminium, teak or mindi (SVLK-documented wood), natural rattan pole | Outdoor vs indoor duty, coastal exposure |
| Weave (anyaman) | HDPE flat, half-round, or rope; natural kubu grey, open-weave rotan | UV-stabilised HDPE for uncovered use |
| Cushions | Quick-dry foam ± 22–28 kg/m³; solution-dyed acrylic covers, zipped and removable | Foam density, fabric brand tier, piping |
| Stackable | Aluminium-frame stackers nest 4–6 high | Saves 40–60% of container volume |
| Modular | Corner, armless, chaise, and ottoman units | Confirm connector hardware and clip type |
One drawing or reference photo per model removes most back-and-forth. Bali furniture sourcing guides confirm that local makers routinely adjust dimensions, finishes, and colours to buyer specification, so OEM and private-label lounge programs are ordinary work here — provide diagrams so the workshop fully understands the requirement.
Natural Rotan or Synthetic HDPE — Which Weave Survives Outdoor Lounge Use?
The honest answer: for uncovered pool decks, rooftops, and beach clubs, synthetic wins. Natural rattan is a plant fiber; constant UV, rain, and salt air dry it, grey it, and loosen the anyaman within a few seasons.
- Synthetic HDPE/PE weave — UV-stabilised, colourfast, hose-washable, woven over powder-coated aluminium. The default for hotel and resort lounge contracts and the only build we recommend for fully exposed positions.
- Natural rattan weave — warmer hand-feel, lower indicative cost, genuinely biodegradable. Right for covered terraces, lobbies, and indoor lounge floors; wrong for open weather. We will say so on your quote rather than sell you a warranty claim later.
Many buyers split a container: synthetic loungers for outdoors, natural kubu club chairs for covered zones. That mix is exactly what a cube-out container plan is for.
What Do Wholesale Lounge Chairs Cost Per Piece and Per Container?
Every figure below is an indicative example only, as of 2026 and subject to change. No standardised industry price list exists for Bali lounge chairs — pricing is supplier-specific and negotiated — so real numbers are quoted per piece against your item list and spec sheet.
| Lounge chair type | Indicative FOB band (USD/pc, example only) | Est. units per 20ft | Est. units per 40ft HC |
|---|---|---|---|
| Stackable HDPE poolside lounge chair | 70–140 | 80–120 | 180–260 |
| Deep-seat HDPE club lounge chair + cushion | 110–210 | 30–45 | 70–100 |
| Natural kubu rattan lounge chair (covered use) | 65–130 | 40–60 | 90–135 |
| Sun lounger, HDPE on aluminium, wheeled | 150–280 | 22–32 | 50–75 |
| Modular corner / armless lounge unit | 120–230 | 26–38 | 60–85 |
Unit counts assume mixed loading with nested stackers and knock-down frames where the design allows; assembled-only designs land at the low end. Minimum order is not a fixed piece count — it is a mixed 20ft or 40ft container that cube-outs, so lounge chairs can share space with dining sets, daybeds, or décor lines.
On timing, logistics guides put Bali-to-Germany shipments at 6–10 weeks total including production, packaging, and sea freight; Bali-to-Australia sea freight alone usually runs 2–6 weeks. Air freight exists but is rarely economical for bulky woven furniture.
Why Source Finished Lounge Chairs From Bali Instead of Raw Rattan?
Because Indonesia deliberately keeps the weaving value at home. Under Trade Regulation Permendag No. 38 of 2017, raw unprocessed rattan may not be exported from Indonesia, while semi-finished rattan and finished rattan furniture may. Then-Trade Minister Enggartiasto Lukita, speaking in Cirebon and reported by ANTARA News, confirmed raw rattan cannot leave the country but semi-finished material can. Rattan policy has shifted before, so treat this as the position as of 2026 — but while it holds, the world’s rattan lounge chairs are largely woven where the cane grows, and buyers of finished goods get the benefit.
The scale is real. BPS-Statistics Indonesia reports Bali Province exported goods worth US$634,496,917 in 2024, and Indonesia’s rattan furniture exports under HS 94038300 reached roughly USD 14.6 million that year, serving 69 countries and more than 400 buyers. Cirebon in West Java remains the historic weaving cluster; Bali is the design-led finishing and export hub where hospitality-grade lounge collections are developed.
Compliance travels with the container. The standard export set is commercial invoice, packing list, bill of lading, certificate of origin, and the Indonesian export declaration. Teak or mindi frame components fall under SVLK timber-legality verification, mandatory for wood furniture exports since 1 January 2015; wooden items also need fumigation certificates, and EU-bound furniture must meet European flame-retardancy and chemical-content rules. We prepare the documents — we do not sell certainty about regulations we do not control.
How Does a Lounge Chair Container Order Work?
- Send your item list. Models, quantities, target specs, destination port — via WhatsApp, email, or the enquiry form below.
- Spec confirmation. We return drawings or reference photos per model so the workshop and you are looking at the same chair.
- Line-item quotation. Per-piece FOB Semarang or Surabaya pricing against your exact specs, with container cube-out plan.
- Sampling or pre-production photos. Physical sample for new OEM designs, or photo/video approval for catalogue models.
- Production and QC. Weaving, framing, cushion sewing, and finishing, with inspection photos before packing.
- Loading and documents. Container stuffing, export document set, and shipment tracking through to your port.
Request a Lounge Chair Quotation
Send your model list and target quantities to the Juara Holding Group export desk — WhatsApp +62 811-3941-4563 or bd@juaraholding.com, or use the enquiry form on the contact page. You get a per-piece FOB quote and a container plan, not a brochure. Part of Juara Holding Group — an Indonesian group operating from Bali across Indonesia since 2015.
Frequently Asked Questions
How many rattan lounge chairs fit in a 20ft container?
As an indicative example only: 80–120 stackable HDPE poolside chairs, 30–45 deep-seat club lounge chairs with cushions, or 22–32 wheeled sun loungers. Exact counts depend on your dimensions and whether frames knock down, so we run a cube-out plan for your specific item list before quoting.
Which frame material lasts longest for outdoor lounge chairs in coastal climates?
Powder-coated aluminium. It will not rust in salt air, keeps stackable chairs light, and carries UV-stabilised HDPE weave well. Teak frames also perform outdoors and ship with SVLK timber-legality documents, but they weather to grey and weigh more. Natural rattan-pole frames belong under a roof, not beside a beachfront pool.
Can lounge chair cushions be specified with quick-dry foam and outdoor fabric?
Yes. Standard hospitality spec is quick-dry open-cell foam around 22–28 kg/m³ density with solution-dyed acrylic covers, zipped and removable for cleaning. State your fabric tier, colour codes, and piping details in the RFQ; workshops in Bali and Cirebon sew cushions to order as part of the same production run.
Can I mix lounge chairs with dining sets and daybeds in one container?
Yes — that is exactly how minimums work here. There is no fixed per-model piece count; the order simply needs to cube-out a mixed 20ft or 40ft container. Most hospitality buyers combine loungers, dining sets, daybeds, and décor in one load. Send the full item list and we quote each line FOB.